| Integrated LED Post Light | Driveways, walkways, patios, and general residential outdoor lighting | Integrated LED module | 8–25 W | 25,000–50,000 hours, depending on thermal design and operating conditions | IP65 or higher recommended for exposed locations; IP65 protects against dust and water jets | IK06–IK08 commonly suitable for residential areas | Look for certification applicable to the installation region, such as UL 1598 or IEC 60598-1; verify grounding and outdoor-use labeling | Clean the optical cover periodically; replace the complete fixture if the sealed LED driver or module fails | High efficiency
Low energy use and minimal routine service, but repairability may be limited |
| Replaceable-Lamp LED Post Light | Homes or properties where future lamp replacement is important | Replaceable LED bulb | 6–20 W | Typically 15,000–25,000 hours for the lamp | IP44 minimum for sheltered areas; IP54–IP65 is preferable for direct exposure | IK04–IK07, depending on the diffuser and housing | Use a lamp rated for enclosed fixtures when required; check socket type, maximum wattage, grounding, and wet-location suitability | Replace lamps as needed; inspect seals, socket condition, and fasteners annually | High serviceability
Lower replacement complexity and easier upgrades over time |
| Solar LED Post Light | Remote paths, garden borders, and locations without convenient wiring | LED module with rechargeable battery | 1–8 W equivalent output system | LED life may reach 25,000–50,000 hours; battery commonly lasts 2–5 years depending on chemistry, temperature, and charge cycles | IP65 or higher recommended for the solar panel, battery compartment, and light head | IK05–IK07 is generally adequate for landscaped residential areas | Check battery safety information, charging protection, secure mounting, and whether the product is designed for outdoor exposure | Clean the solar panel several times per year; keep vegetation from shading it; replace the battery when nighttime runtime declines | Low operating cost
No trenching or grid electricity, but performance varies with sunlight, season, and battery aging |
| Low-Voltage LED Post Light | Landscape lighting systems, gardens, and properties requiring safer cable routing | 12 V or 24 V LED system | 3–15 W per fixture | 25,000–50,000 hours for quality LED modules | IP65 recommended for fixtures; buried cable connections should use connectors rated for underground or wet locations | IK05–IK08, based on housing material and lens construction | Use a compatible listed transformer, outdoor-rated cable, correct cable gauge, weatherproof connections, and ground-fault protection where required by local code | Inspect cable connections, transformer capacity, lens cleanliness, and signs of water entry at least annually | Balanced value
Efficient and flexible, although installation quality strongly affects reliability |
| Mains-Voltage LED Post Light | Permanent lighting for entrances, public-facing areas, and large properties | Integrated LED or replaceable LED lamp | 10–40 W | 25,000–50,000 hours for integrated LED; 15,000–25,000 hours for many replaceable lamps | IP65 or higher recommended where the fixture is fully exposed to rain | IK06–IK08 for areas exposed to accidental contact or light vandalism | Installation should comply with local electrical codes; verify listed outdoor suitability, grounding, cable entry protection, and correct overcurrent protection | Annual visual inspection; clean lenses; check mounting, cable glands, corrosion, and water ingress | Strong output
Reliable for permanent service, but professional installation and electrical protection add initial cost |
| Decorative Metal Post Light | Entrances, heritage-style properties, courtyards, and appearance-focused landscapes | Replaceable LED lamp or integrated LED | 8–30 W | 15,000–50,000 hours, depending on the light source | IP44–IP65; choose IP65 or better for unprotected coastal or high-rain locations | IK04–IK07, depending on glass, acrylic, and metal construction | Inspect coating quality, corrosion resistance, grounding continuity, glass retention, and regional electrical certification | Remove dirt and salt deposits; touch up damaged coatings; inspect screws, joints, and glass panels for corrosion or cracking | High visual value
Long service life is possible with corrosion-resistant materials and regular finish maintenance |
| Motion-Sensor LED Post Light | Side gates, driveways, entrances, and security-focused pathways | Integrated LED or replaceable LED lamp with occupancy sensor | 8–30 W when illuminated | 25,000–50,000 hours for integrated LED; sensor life depends on environmental exposure and switching cycles | IP54 minimum for sheltered outdoor use; IP65 is preferable for exposed sensor and control compartments | IK05–IK08, depending on the installation environment | Check sensor compatibility, switching load, grounding, outdoor rating, adjustment controls, and local code requirements | Clean the sensor lens; test detection range and timer settings; inspect seals and wiring at least annually | Energy-saving
Reduces operating hours, but sensor replacement or false triggering can increase service needs |
