canada flag

PROUDLY CANADIAN COMPANY OWNED & OPERATED IN TORONTO SINCE 1989!

MENU

Sales & Support

416.364.3834 1.888.990.9234
CALL NOW

Windows | Doors Blog

12Jul

Wood vs Fiberglass Door For Entry Replacement

Wood vs Fiberglass Door For Entry Replacement

Replacing your front door is a big decision. Wood and fiberglass are two of the most popular materials for entry doors. Each has its own strengths in terms of style, durability, and maintenance. To help you choose the right one for your home, we have to go through a clear comparison.

Read More

How to Choose the Best Exterior Plywood?

Exterior Plywood is not a single, all-weather product. It is a family of panels designed for different exposure conditions, uses, and installation details. A sheet beside a sheltered porch may face occasional dampness. One beneath open siding may encounter wind-driven rain, repeated drying, and seasonal movement. Those differences matter. So do the panel’s grade, thickness, veneer quality, and edge protection.

APA – The Engineered Wood Association emphasizes matching a panel’s exposure classification to its intended use. In plain terms: check the grade stamp, not just the front label. “Exterior” does not mean every edge can stay wet indefinitely. The details decide a lot. A small gap, an unsealed cut, or a poorly placed fastener can undermine an otherwise suitable panel. It is easy to focus on the sheet itself and overlook the assembly around it.

This guide will explain how to compare grades, understand exposure ratings, and choose thickness for common projects. It will also cover installation, finishing, and storage, because selection alone cannot guarantee long service. Look for clear product documentation and follow the manufacturer’s instructions. A lower price may suit a protected application, but it can be a poor bargain in a harsher location. Even careful advice has limits: local weather, framing, and workmanship change the result. That deserves a second look before you buy.

How to Choose the Best Exterior Plywood?
Table of Contents [Hide]
1 Distinguish APA Exterior Panels from Exposure 1 for Long-Term Weather Use
2 Match APA Face Grades A–D to Appearance and Surface Requirements
3 Read Span Ratings: 32/16 Allows 32-Inch Roof and 16-Inch Floor Supports
4 Check Panel Thickness, Ply Construction, and Applicable PS 1 or PS 2 Standards
5 Assess Preservative Treatment, Edge Sealing, and Installation for Durability

Distinguish APA Exterior Panels from Exposure 1 for Long-Term Weather Use

How to Choose the Best Exterior Plywood?

Distinguish APA Exterior Panels from Exposure 1 for Long-Term Weather Use

Choosing plywood for an outdoor project starts with its exposure rating, not just its thickness. Look for “Exterior” on the panel grade stamp when the sheet will face repeated rain or damp conditions. Exterior-rated panels use a bond designed to withstand repeated wetting and drying. They are not waterproof, though. Sun, standing water, and unsealed edges can still cause damage.

“Exposure 1” panels also use a moisture-resistant bond, but they are intended for temporary exposure during construction, not ongoing weather. It is easy to mistake the two labels because both sound reassuring. That distinction matters. For a shed wall or other permanently exposed surface, choose Exterior-rated plywood and plan a suitable finish. Check local project specifications, too; requirements can vary.

Tips: Read the full grade stamp before buying. Seal cut edges, keep panels clear of soil, and provide drainage so water cannot sit against them. Store sheets flat and covered before installation. A protective coating helps, but it cannot fix poor drainage or replace the correct exposure rating.

Match APA Face Grades A–D to Appearance and Surface Requirements

Exterior plywood selection starts with two separate questions: how should the face look, and what exposure must the panel withstand? APA’s Engineered Wood Construction Guide distinguishes surface appearance from panel performance. The U.S. Department of Commerce’s PS 1-19 standard defines four face grades, A through D, with limits for visible defects. A face grade alone does not confirm weather suitability. Check the panel’s exposure classification and span rating separately.

Grade A has a smooth, carefully finished face suited to visible areas and paint. Grade B allows minor repairs and blemishes, so it works where a neat surface matters but perfection does not. Grade C has more visible knots and other permitted defects; C-plugged faces have repaired openings. Grade D allows more noticeable defects and is commonly used on concealed faces. That distinction matters. For a painted shed door, A or B may save filling and sanding time; behind siding, a lower face grade may be adequate. APA guidance and PS 1-19 describe these grades as appearance and veneer-quality categories, not guarantees of a flawless finish. Read the panel stamp before buying; grade names are easy to overread, and actual surface quality still deserves a close look.

Read Span Ratings: 32/16 Allows 32-Inch Roof and 16-Inch Floor Supports

How to Choose the Best Exterior Plywood?

A 32/16 span rating tells you how far supports may be spaced in two different applications. APA’s Engineered Wood Construction Guide identifies the first number for roof supports and the second for floor supports. In practical terms, 32/16 allows supports spaced 32 inches apart for roofs and 16 inches apart for floors, subject to the panel’s installation requirements. Check the grade stamp before lifting a sheet into place. It should also show panel thickness and exposure classification.

The rating is not a promise that every 32-inch roof framing layout is suitable. Loads, panel orientation, edge support, and local building requirements still matter. A heavy snow load, for example, may call for closer supports or a different panel specification. Small details count. Follow the panel manufacturer’s technical guidance, and confirm the framing plan with a qualified building professional when conditions are unusual. Exterior exposure is a separate issue: a span rating alone does not establish resistance to prolonged moisture. APA guidance distinguishes structural panel ratings from exposure classifications, so check both before buying. It is easy to focus on the large 32/16 stamp and miss the smaller, equally important details.

Check Panel Thickness, Ply Construction, and Applicable PS 1 or PS 2 Standards

Choosing exterior plywood starts with panel thickness, but the right choice depends on the framing beneath it. Check the project plans and span tables, then compare the specified thickness with the support spacing. A sheet that feels sturdy in the yard may flex between widely spaced joists. Measure the edge if the label seems unclear; nominal and actual thickness can differ. Small detail.

Ply construction offers another useful clue. More, thinner plies can improve stability when veneers are balanced across the panel. Look at the cut edge for gaps, overlaps, or an uneven core. I have seen a thick panel with rough internal voids perform less predictably than expected. Still, ply count alone cannot confirm structural capacity; grade, species, adhesive bond, and intended span matter too.

Read the panel stamp before buying. PS 1 sets construction and grade requirements for structural plywood, while PS 2 sets performance requirements for structural-use panels, including plywood and other panel types. The stamp should identify the standard, grade, thickness, and exposure classification. “Exterior” describes a moisture-resistant bond, not protection from standing water or decay. Check local requirements and product documentation for the intended use. I would not guess here.

Assess Preservative Treatment, Edge Sealing, and Installation for Durability

How to Choose the Best Exterior Plywood?
Assess Preservative Treatment, Edge Sealing, and Installation for Durability

Choose plywood rated for the exposure it will face, and verify whether preservative treatment suits the intended use. Treated panels still need thoughtful detailing. The USDA Forest Products Laboratory’s 2021 Wood Handbook (FPL-GTR-282) reports that many decay fungi need wood moisture levels around 20% or higher. Repeated wetting can therefore matter more than a single splash. Seal exposed edges and cutouts with a compatible product, following its application instructions. Pay special attention to panel bottoms, fastener holes, and corners where water can linger.

Tips: Keep panels clear of soil and standing water. Flash joints, allow drainage, and use fasteners suited to treated wood. Follow the panel maker’s spacing and installation guidance. No coating can rescue a wall that traps water; it sounds obvious, but rushed details are easy to miss.

Before installation, inspect panels for damage and keep them dry, flat, and covered. Seal fresh cuts as specified, then check that siding, trim, and flashing shed water away from edges. Edge sealing helps, but it is not a substitute for drainage or suitable treatment. Small gaps and imperfect cuts happen; repair exposed areas before they become wet pathways.

How to Choose Exterior Plywood for Durability

Practical priority ratings for key selection and installation checks (1 = lower priority, 5 = highest priority). These are guidance ratings, not laboratory test results or predicted service-life measurements.

Choose plywood rated for the intended exposure, use preservative-treated material where the project requires decay protection, seal cut edges, and install it to shed water. Follow the panel and coating manufacturers’ instructions for clearances, fasteners, and maintenance.

Article Source:

Read Our 5-Star Testimonials

quotes

Amazing service and quality products. Installation was on time and on budget. Our windows look awesome. Edan gave us his full attention from the first call and every step of the way after. Highly recommend.

Adam Rivers Reviewer Image

Adam Rivers

quotes

New windows and door for basement and new metal/glass back door for main house - even through my indecisiveness and the covid-19 challenges Ayal and his installers were patient with me and I am very happy with the look and quality of the install.

homestars logo image
Geraint Reviewer Image

Geraint

quotes

It was a pleasure dealing with Jack and all Delco's stuff. The windows arrived on the date for which were promised. The quality of the service, product and workmanship were excellent. I would gladly recommend Delco to anyone need Windows and Doors

Ruven Y. Reviewer Image

Ruven Y.

quotes

We're so happy with our new front door. Very high quality finish, beautiful window. Installation was impeccable and done very quickly. Hinge and 3-point lock mechanism fit perfectly and feel very solid. Very attentive customer service. Door really ups our curb appeal!

homestars logo image
Jim Bird Reviewer Image

Jim Bird

quotes

I just had my front door replaced and cannot say enough good things about this company. From start to finish their professionalism is outstanding, and the workmanship excellent. Would highly recommend

Maureen Fuller Reviewer Image

Maureen Fuller

quotes

Delco supplies my windows and doors for renovations throughout the GTA. Edan and his staff are the best. Well priced quality products and personalized service. Highly recommended.

homestars logo image
Noah Klar Reviewer Image

Noah Klar

quotes

We have 3 sliding doors and a double front door replaced. All work was done professionally but well qualified craftsman. Watching them work it was clear they new what they were doing and work is first class.

homestars logo image
R. Pierce Reviewer Image

R. Pierce

quotes

We used Delco to replace our windows and patio door and door glass inserts. We are very happy with the quality of the windows and patio door and were very impressed with the installers as well who were very professional and clean. Thank you Nasho and George for your hard work and patience. Also, a big thank you to Ayal who always returned my calls and answered all my questions.

homestars logo image
Sandra Reviewer Image

Sandra

quotes

Delco provided all the exterior doors for our new home build. Ayal was great and the company is very customer service oriented. The doors look beautiful, the hardware is high end and the install went very well. Overall we are very happy with the product and service.

homestars logo image
Sarah Reviewer Image

Sarah

quotes

Ayal and Edan were great to work with. They provided extensive product knowledge and had a great selection in their showroom. The windows and doors changed the whole look of the house and gave a much needed modern yet classic update. Great quality and workmanship! Thank you!

Stephanie Lannaci Reviewer Image

Stephanie Lannaci

quotes

Both my wife and I could not have been happier with the product and service displayed by the owner and the installers. They had kept true to there word and the timelines. The process was catered to our schedule and was seamless.

Fabrizio Macieri Reviewer Image

Fabrizio Macieri

quotes

Had a great experience with Delco. They were professional and did a great job on time.

Joey Oliveira Reviewer Image

Joey Oliveira

quotes

Our experience with Delco Doors has been very good. We needed to replace out front door. Our old 6 feet Steel doors were removed and replaced with Delco 8 feet Fiberglass Doors. The installation went very smoothly, and the guys made sure that everything was fitting squarely and tight. They cleaned up after they were done and were very pleasant to work with. Would highly recommend them.

Angie Gandhi Reviewer Image

Angie Gandhi

quotes

A fantastic company to deal with from start to finish. They were professional, courteous and the project was completed in the timeframe agreed upon. Would highly recommend Delco.

homestars logo image
Linda Reviewer Image

Linda

quotes

I would recommend Delco Windows and Doors without any hesitation. The quality of the products is very good, the installation exceeded my expectations and the responsiveness and punctuality is impressive.

homestars logo image
Serban Dinca Reviewer Image

Serban Dinca

quotes

Very good and timely service. A pleasure to work with Edan Next time I need windows and doors I will definitely call them again

Adrian Nema Reviewer Image

Adrian Nema

quotes

Recently ordered a custom window from Delco. We are extremely happy with the level of customer service - Elyse went out of her way to notify us when the window came in and came in to work on her day off so we could come pick up the window. If we need another window we will definitely come back to Delco!

Jonathon & Sheri Mcintosh Reviewer Image

Jonathon & Sheri Mcintosh

quotes

I would highly recommend this company, the final product was beyond my expectations, My new front door makes my house standout so happy thank you Delco Windows and doors. I will definitely use Delco Windows and doors again in the future thanks to Edan and the installers

Maria Reviewer Image

Maria

quotes

Existing door replacement is a delicate project. I am very satisfied with job well done by Ayal Jack and his installer. Highly professional team, they know their business well, easy to deal with, very accommodating. He guided us step by step to select the best fit for our purpose.

homestars logo image
Alfy Reviewer Image

Alfy

quotes

I would highly recommend this company. They were very easy to deal with, accommodating and professional. The final product was beyond my expectations. The products completely transformed the front of my house and for sure increased its value and curb appeal. Thanks!

homestars logo image
Mi Reviewer Image

Mi

quotes

Happy experience from start to finish. Thank you to Edan for going out of his way to meet us late one evening and his helpful consultation in the showroom especially thank you to the extremely professional, clean and friendly crew of installers. Everything was as promised, the men arrived on time, their work was immaculate and complete, their craftsmanship beyond reproach.

Esther Tobin Reviewer Image

Esther Tobin

REQUEST A QUOTE

We’ll Come To You!

GET A FREE QUOTE

Quality New Windows & Doors. Competitively Priced!

Christine R.

Please, enter a valid value