canada flag

PROUDLY CANADIAN COMPANY OWNED & OPERATED IN TORONTO SINCE 1989!

CALL NOW

Windows | Doors Blog

How to Retrofit Windows for Better Energy Efficiency?

A drafty window is easy to notice: curtains shift, the glass feels cold, and heating runs longer. These clues often point to air leakage, weak seals, or poor glazing. The U.S. Department of Energy reports that heat gain and loss through windows account for about 25–30% of residential heating and cooling energy use. That makes windows a practical place to investigate—not an automatic reason to replace them.

A retrofit windows project can range from sealing gaps and repairing weatherstripping to adding storm windows or improving existing frames. The right option depends on the window’s condition, local climate, and the source of the energy loss. ENERGY STAR estimates that replacing old windows with certified models can save households around 7–15% on energy bills. Those figures are estimates, not a promise for every home. Installation quality and existing insulation matter.

This guide explains how to assess windows, compare retrofit options, and avoid spending on upgrades that solve the wrong problem. A simple tissue test near a frame can reveal a draft, but it cannot diagnose every cause. Still, it helps. Some improvements are less visible, and results may be modest. That deserves a closer look. Homeowners should compare expected comfort and energy savings with upfront cost, then check product guidance from the Department of Energy and ENERGY STAR before choosing a solution.

How to Retrofit Windows for Better Energy Efficiency?

Assess Existing Windows for Heat Loss, Drafts, and Moisture

Before planning a retrofit, inspect each window on a cold or windy day. Look for cracked glazing, failed seals, soft or stained wood, and condensation between panes. That fog usually signals a failed insulated-glass seal, not a surface-cleaning problem. A paper strip pulled from a closed sash can reveal weak compression. A hand near the frame may detect a draft, but air movement can be hard to judge. A quick hand test can mislead.

The U.S. Department of Energy’s Energy Saver guidance estimates that windows account for about 25–30% of residential heating and cooling energy use. That figure varies with climate, window area, and the rest of the home’s envelope.

Record which rooms feel cold, and note whether drafts come from the sash, frame, or nearby trim. On a sunny afternoon, check for excessive heat and faded furnishings, too. The pattern matters.

Moisture needs a closer look. Wipe the glass, then check whether condensation returns and where it forms. Persistent wetness on frames can damage finishes and encourage mold growth. The U.S. Environmental Protection Agency recommends keeping indoor humidity below 60%, ideally between 30% and 50%. A basic hygrometer can help confirm readings over several days. Don’t assume every damp spot means a window failure; cooking, bathing, and poor ventilation can raise indoor humidity. My first inspection is rarely perfect, so I photograph problem areas and recheck them after rain or a temperature change.

Choose Retrofit Options for the Window Type and Local Climate

A good window retrofit starts with the window you already have and the weather it faces. Older single-pane windows often benefit from well-fitted storm panels, which add an insulating air space without replacing the sash. In cold, windy areas, repair loose glazing and add durable weatherstripping to reduce drafts. Small gaps matter. So does installation quality.

For double-pane windows, inspect the seals before adding film or interior panels. Fog trapped between panes can indicate seal failure, and extra coverings may not fix it. In hot, sunny climates, solar-control film can reduce glare and heat gain, especially on exposed windows. Choose a product suited to the glass; some films can stress certain panes. Humid climates need careful attention to condensation. Keep indoor moisture in check, and watch for damp frames after cold nights.

Match the retrofit to each window, not just the house. A north-facing window may need draft control, while a west-facing one may need stronger sun protection. Before buying materials, note the frame condition, direction, and seasonal comfort problems. Compare manufacturer specifications, and ask a qualified window professional about unusual glazing or persistent moisture. It is easy to assume the most insulating option is always best. That assumption deserves a second look: airflow, condensation, cost, and ease of repair also affect performance.

Repair Frames and Seal Gaps Around Window Openings

Window frames can leak air when paint cracks, joints separate, or wood softens near the sill. On a cool day, move a damp hand around the frame to feel for drafts. Check corners with a flashlight, too. Soft or crumbling wood needs repair before caulk can help. Remove loose paint and failed sealant, then replace damaged sections with materials suited to the frame. Let repairs dry fully before painting or sealing. A rushed patch may hide moisture rather than solve it.

Seal narrow gaps between the frame and wall with an appropriate exterior-grade sealant. Use backer rod for deeper openings; a thick bead alone may not bond well. Indoors, seal small gaps around trim to reduce drafts, but keep window drainage paths clear. Do not cover weep holes or block moving sash tracks. Weatherstripping can improve a leaky sash, though it should not make the window difficult to close. It is tempting to seal every visible crack. Pause and check where water needs to escape.

Tips: Test one window first. Choose sealant compatible with the frame material, and follow its curing directions. After repairs, check for drafts again on a windy day. If the frame is badly rotten or the opening shifts, get a qualified assessment before adding more sealant.

How to Retrofit Windows for Better Energy Efficiency

Repair window frames and seal gaps around openings to reduce drafts and air infiltration.

Estimated conductive heat flow through a 10-square-foot window with a 30°F indoor–outdoor temperature difference, calculated as U-factor × area × temperature difference. The representative U-factors are 1.0 for single-pane, 0.5 for double-pane, and 0.3 for double-pane low-e windows; actual products vary. Repairing frames and sealing gaps helps limit drafts, an effect not measured in this heat-flow comparison.

Add Insulation with Storm Windows, Films, or Improved Glazing

Drafty windows often leak heat around the sash, not just through the glass. The U.S. Department of Energy estimates that windows account for 25–30% of residential heating and cooling energy use. That figure is a national estimate, not a promise for every home. A cold hand near the frame can help identify leaks, but it cannot measure energy savings.

Storm windows add a protective air space over existing glazing and can reduce drafts without removing the original sash. Low-emissivity storm panels also reflect heat back indoors during cold weather. For sunny rooms, window film can limit solar heat gain, though the wrong film may darken a room or stress some glass. Check the glass type and film instructions before installation. Measure twice. Where frames are sound, replacing single glazing with insulated double glazing may provide a stronger upgrade, but it costs more and creates more material waste. The U.S. Department of Energy’s Energy Saver guidance recommends comparing window condition, climate, and installation quality before choosing a retrofit. I would not assume one fix fits every window: a badly sealed frame can undermine expensive glazing. Seal gaps carefully, then compare the room’s comfort through a cold morning and a sunny afternoon.

How to Retrofit Windows for Better Energy Efficiency? - Add Insulation with Storm Windows, Films, or Improved Glazing

Retrofit option How it improves efficiency Best suited to Daylight and view Key considerations
Exterior storm windows Add a second glazing layer and an air space that can reduce heat transfer and limit drafts when the units fit and are installed properly. Older single-pane windows that are sound but not ready for replacement. Usually preserves the interior view; frames may slightly change the exterior appearance. Choose a compatible, well-sealed unit. Make sure the existing window can drain and dry to help avoid trapped moisture.
Interior storm panels Create an additional interior air layer and can reduce air leakage around older windows when the panel edges seal closely. Windows where exterior installation is difficult, including some upper-story openings. Clear panels retain most daylight, though reflections can change the view slightly. A tight interior seal is important. In cold weather, check for condensation between the panel and the original window.
Seasonal shrink film Forms a temporary air layer over the window opening, helping reduce drafts and heat loss through air movement. Low-cost, temporary improvements for drafty windows during the heating season. Generally clear when installed smoothly, but the film must remain intact to work. Usually removed or replaced seasonally. It does not repair damaged frames or stop leaks elsewhere in the opening.
Solar-control window film Can reduce solar heat gain through the glass, which may lower cooling loads on sun-exposed windows. Rooms with excessive glare or unwanted summer heat, especially where cooling is a concern. May reduce visible light or alter color and reflectance, depending on the film. Check compatibility with the existing glass and frame. Lower solar gain can also reduce useful winter sunlight.
Low-emissivity (low-e) film A thin coating can reflect some radiant heat while transmitting daylight; the effect depends on the film and the window system. Existing glazing that is in good condition and compatible with the selected film. Often less visually noticeable than heavily tinted films, but appearance and light transmission vary. Use a film rated for the particular glazing. Some combinations can increase glass stress or affect insulated-glass warranties.
Replace glazing or sash with improved glazing Insulated glazing with multiple panes and low-e coatings can reduce heat transfer compared with single-pane glass. Frames that are structurally sound but have inefficient or damaged glazing, where a compatible replacement is available. Usually keeps a familiar window layout; new glazing may have different reflectance or color. Confirm frame condition, glazing dimensions, and drainage details. Replacing only the glass will not correct air leaks in the frame.

Performance varies with climate, window condition, product specifications, and installation quality. For comparing glazing, a lower U-factor indicates less heat transfer; solar heat gain coefficient (SHGC) indicates how much solar heat enters through the window. Seal operable-window gaps separately where needed, while keeping required ventilation and moisture control in mind.

Check Retrofit Performance and Maintain Seals and Hardware

After retrofitting a window, check whether it actually improves comfort. On a cold morning, note drafts near the frame and compare indoor temperatures before and after the work. A basic room thermometer can help, though readings vary with sunlight and heating cycles. Look closely.

Check for condensation, rattling, and uneven gaps around the sash. These clues may point to poor alignment or a seal that is not making full contact. If you have a suitable energy monitor, compare heating use across similar weather periods; one cold week is not reliable evidence. Keep brief notes, including outdoor temperatures and which rooms feel uncomfortable. The comparison may be imperfect, but it is more useful than guessing.

Inspect weatherstripping every few months, especially after heavy use. Press gently along the seal: it should sit evenly, without cracks, flattened spots, or loose corners.

Clean tracks with a soft brush, then remove grit that could strain moving parts. Check hinges, latches, and locks for looseness or resistance.

Tighten only hardware designed for adjustment, and avoid forcing a stiff sash; a small alignment issue can worsen. I would not assume every draft means the retrofit failed. Sometimes a worn seal, blocked track, or nearby gap needs separate attention.

Read Our 5-Star Testimonials

quotes

Amazing service and quality products. Installation was on time and on budget. Our windows look awesome. Edan gave us his full attention from the first call and every step of the way after. Highly recommend.

Adam Rivers Reviewer Image

Adam Rivers

quotes

New windows and door for basement and new metal/glass back door for main house - even through my indecisiveness and the covid-19 challenges Ayal and his installers were patient with me and I am very happy with the look and quality of the install.

homestars logo image
Geraint Reviewer Image

Geraint

quotes

It was a pleasure dealing with Jack and all Delco's stuff. The windows arrived on the date for which were promised. The quality of the service, product and workmanship were excellent. I would gladly recommend Delco to anyone need Windows and Doors

Ruven Y. Reviewer Image

Ruven Y.

quotes

We're so happy with our new front door. Very high quality finish, beautiful window. Installation was impeccable and done very quickly. Hinge and 3-point lock mechanism fit perfectly and feel very solid. Very attentive customer service. Door really ups our curb appeal!

homestars logo image
Jim Bird Reviewer Image

Jim Bird

quotes

I just had my front door replaced and cannot say enough good things about this company. From start to finish their professionalism is outstanding, and the workmanship excellent. Would highly recommend

Maureen Fuller Reviewer Image

Maureen Fuller

quotes

Delco supplies my windows and doors for renovations throughout the GTA. Edan and his staff are the best. Well priced quality products and personalized service. Highly recommended.

homestars logo image
Noah Klar Reviewer Image

Noah Klar

quotes

We have 3 sliding doors and a double front door replaced. All work was done professionally but well qualified craftsman. Watching them work it was clear they new what they were doing and work is first class.

homestars logo image
R. Pierce Reviewer Image

R. Pierce

quotes

We used Delco to replace our windows and patio door and door glass inserts. We are very happy with the quality of the windows and patio door and were very impressed with the installers as well who were very professional and clean. Thank you Nasho and George for your hard work and patience. Also, a big thank you to Ayal who always returned my calls and answered all my questions.

homestars logo image
Sandra Reviewer Image

Sandra

quotes

Delco provided all the exterior doors for our new home build. Ayal was great and the company is very customer service oriented. The doors look beautiful, the hardware is high end and the install went very well. Overall we are very happy with the product and service.

homestars logo image
Sarah Reviewer Image

Sarah

quotes

Ayal and Edan were great to work with. They provided extensive product knowledge and had a great selection in their showroom. The windows and doors changed the whole look of the house and gave a much needed modern yet classic update. Great quality and workmanship! Thank you!

Stephanie Lannaci Reviewer Image

Stephanie Lannaci

quotes

Both my wife and I could not have been happier with the product and service displayed by the owner and the installers. They had kept true to there word and the timelines. The process was catered to our schedule and was seamless.

Fabrizio Macieri Reviewer Image

Fabrizio Macieri

quotes

Had a great experience with Delco. They were professional and did a great job on time.

Joey Oliveira Reviewer Image

Joey Oliveira

quotes

Our experience with Delco Doors has been very good. We needed to replace out front door. Our old 6 feet Steel doors were removed and replaced with Delco 8 feet Fiberglass Doors. The installation went very smoothly, and the guys made sure that everything was fitting squarely and tight. They cleaned up after they were done and were very pleasant to work with. Would highly recommend them.

Angie Gandhi Reviewer Image

Angie Gandhi

quotes

A fantastic company to deal with from start to finish. They were professional, courteous and the project was completed in the timeframe agreed upon. Would highly recommend Delco.

homestars logo image
Linda Reviewer Image

Linda

quotes

I would recommend Delco Windows and Doors without any hesitation. The quality of the products is very good, the installation exceeded my expectations and the responsiveness and punctuality is impressive.

homestars logo image
Serban Dinca Reviewer Image

Serban Dinca

quotes

Very good and timely service. A pleasure to work with Edan Next time I need windows and doors I will definitely call them again

Adrian Nema Reviewer Image

Adrian Nema

quotes

Recently ordered a custom window from Delco. We are extremely happy with the level of customer service - Elyse went out of her way to notify us when the window came in and came in to work on her day off so we could come pick up the window. If we need another window we will definitely come back to Delco!

Jonathon & Sheri Mcintosh Reviewer Image

Jonathon & Sheri Mcintosh

quotes

I would highly recommend this company, the final product was beyond my expectations, My new front door makes my house standout so happy thank you Delco Windows and doors. I will definitely use Delco Windows and doors again in the future thanks to Edan and the installers

Maria Reviewer Image

Maria

quotes

Existing door replacement is a delicate project. I am very satisfied with job well done by Ayal Jack and his installer. Highly professional team, they know their business well, easy to deal with, very accommodating. He guided us step by step to select the best fit for our purpose.

homestars logo image
Alfy Reviewer Image

Alfy

quotes

I would highly recommend this company. They were very easy to deal with, accommodating and professional. The final product was beyond my expectations. The products completely transformed the front of my house and for sure increased its value and curb appeal. Thanks!

homestars logo image
Mi Reviewer Image

Mi

quotes

Happy experience from start to finish. Thank you to Edan for going out of his way to meet us late one evening and his helpful consultation in the showroom especially thank you to the extremely professional, clean and friendly crew of installers. Everything was as promised, the men arrived on time, their work was immaculate and complete, their craftsmanship beyond reproach.

Esther Tobin Reviewer Image

Esther Tobin

We’ll Come To You!

GET A FREE QUOTE

Quality New Windows & Doors. Competitively Priced!

Christine R.

Please, enter a valid value